Why Upgrade Your GR Supra Emblems?
\n\n\n\nThe MK5 Toyota GR Supra (A90/A91) is a masterpiece of modern JDM engineering. However, many enthusiasts agree that the factory chrome badges don’t always match the aggressive styling of the car, especially if you’re running aftermarket wheels or carbon fiber aero parts. Upgrading to Matte Black or Red OEM-style emblems is one of the easiest, most cost-effective visual modifications you can do.
\n\n\n\nTools You’ll Need
\n\n\n\n- \n
- A heat gun or hair dryer \n
- Fishing line or dental floss \n
- Goo Gone or an automotive-safe adhesive remover \n
- Isopropyl alcohol and a microfiber towel \n
- Painter’s tape (for alignment) \n
Step-by-Step Removal and Installation
\n\n\n\nStep 1: Mark the Alignment
\n\n\n\nBefore you remove the original badge, use painter’s tape to outline the edges of the factory emblem. This ensures your new emblem will be perfectly centered.
\n\n\n\nStep 2: Heat the Adhesive
\n\n\n\nUse your heat gun or hair dryer on a medium setting. Keep it moving continuously about 3-4 inches away from the emblem for 30 to 60 seconds. You want it warm to the touch, but not hot enough to damage your clear coat.
\n\n\n\nStep 3: Floss It Off
\n\n\n\nTake about 12 inches of fishing line or dental floss, wrap it around your fingers, and gently slide it behind the emblem. Use a sawing motion to cut through the 3M foam tape. Never pry the emblem off with a screwdriver, as this can easily scratch your paint.
\n\n\n\nStep 4: Clean the Surface
\n\n\n\nYou’ll likely have some adhesive residue left over. Apply a little Goo Gone and let it sit for a minute, then gently rub it off with a microfiber towel. Finally, wipe the area with isopropyl alcohol to ensure a completely clean, wax-free surface for the new emblem to stick to.
\n\n\n\nStep 5: Install Your New Badge
\n\n\n\nPeel the backing off your new emblem. Using the painter’s tape outline you created in Step 1, carefully align the badge. Once positioned, press firmly for 30 seconds. Avoid washing your car for at least 24 hours to let the adhesive fully cure.
\n\n\n\nWhere to Buy High-Quality GR Supra Emblems?
\n\n\n\nNot all aftermarket badges are created equal. You want an emblem that matches OEM dimensions exactly and uses automotive-grade 3M adhesive to prevent peeling or fading in the sun.
\n\n\n\nAt MT Auto Parts, we stock premium Toyota GR Supra A90/A91 Front & Rear Emblems in sleek Black and Red combinations. They are exact OEM spec, ensuring a perfect flush fit on your hood and trunk.
\n\n\n\n\n\n\n\n\n\nSpecial Offer: Use promo code FIRST20 at checkout to get 20% off your entire order!